LXR-02 Firmware Update 1.7

We have taken over the firmware development from Sonic Potions and after many hours of painstaking effort we are delivering a much needed maintenance update!

LXR-02 V1.7 CHANGELOG:

* Compatibility with Octatrack when sequenced with MIDI
* Per-setp parameters displayed now when step is held down and can be changed. Max 2 unique parameters can be saved - if more are changed the oldest per-step param is overwritten
*  Kit morph - when changing the kit, the morph-kit is kept the same. However, is morph set to 255, the morph-kit still slightly changes when swapping to a different kit, but way more manageable
*  Delay when routed to an R channel does not crackle anymore
* Fixed MIDI clock going out of sync over time
* Fixed LXR starting sequencer randomly when synced via MIDI
* Added selection between MIDI (MID) or analog clock (EXT) in BPM parameter. MIDI and analog clock no longer work simultaneously
* When BPM selected as MID or EXT, encoder needs to be rotated more for changes to happen. This is to avoid accidental inputs when playing

> Copy the latest LXR_V2_xxx.img to the root of the SD card
> Push and hold the encoder button while turning on the device
> “LXR Bootloader” will pop up in the display
> The LXR will check if the firmware image is valid and has the proper checksum
> If the check is passed, the update will be installed
> Do not turn off the power during installation!> Once done, the LXR will prompt you to reboot and the new firmware will be running

DOWNLOAD 1.7 FIRMWARE HERE!

NB! Its always a good thing to back up your SD card contents before running the update in case the projects get scrambled during or after the update.

Have fun!